500 Barrel Corrugated Wall, Liquid Storage Tanks come equipped
with new running gear, 10 mil DFTchemical resistant liners. All are built from
1/4" Heavy Duty Corrugated Steel.
Specifications
- Floor: 1/4” PL, V-Bottom with integral formed side channels
- Floor Support: 10" channel longitudinal
runners with 8" channel and formed 1/4” PL channel crossmembers
- Walls: 1/4” PL solid welded, corrugated
steel, corrugations 15" on center
- Roof: Flat top, 1/4” PL solid welded with channel supports outside
- Front/Rear: 1/4” PL solid welded, corrugated
steel, 10" radius at vertical outside corners
- Drain/Fill: 4" floor drain at rear end, 3" fill
pipe to roof at rear, 4" suction line connection
at front, 4" mid high connection at front, 8" flanged front manifold connection with turn down
to floor sump
- Manway: 21" manway on front, side, (3) non-sealed hatches on roof
- Pick Up: Standard 5th wheel king
pin
- Welds: All welds continuous except substructure crossmembers
- Axle: 25,000 lb. axle with air brakes, 11.00
x 22.5 bias tires on steel disc wheels
- Access: Front stairway
- Finish: Per customer specifications
- Hydrotesting: Full capacity static test
- Dimensions: 45’ long, 8’-6" wide, 10’ high; 500 barrel capacity
- Tank pressure/ vacuum relief vent
- Level gauging
- Options: Special tank linings, special sizes, open top design, fixed or removable steam coils,
8" exterior
manifold assembly
|
Click images to enlarge
(opens in pop up window) |
PRODUCTS