Standard Features
- 1/4" Steel plate tank construction
- Smooth interior walls for easier cleaning
- V-bottom floor for better drainage
- 3" fill line
- Manways conveniently located on front, side and top
- 4" drains and front inlet/outlet
- Heavy duty nosebar assembly
- Flange mount blaylock LL10 P/V vent 16 oz pressure, 0.4 oz vac setting
- 2" coupling W/plug
- 4" flange with blind cover
- 3" elbow fill line with cap
- Safety walk way (36" grating)
- access stairs
- level gauge with 8" stainless steel ball "Y" support holds ball 1" minimum off floor
- Front drain with valve, threaded flange, plug, chain
- 21" manway, domed lid (2)
- 11.00 X 22.5 tubeless tire on 10 hole steel wheel
- Folding hand rails
- 4" flange valve, threaded flange, plug, chain remote operation handle
- 25K axle, automatic slack adjusters, top mounted 30 service chambers, outboard drums, Hutch 9700 suspension,
3 leaf high arch springs
- DOT tail lights and lower market lights, no top lights
- 4" coupling with plug
Specifications
- Floor: 1/4” PL, V-bottom with integral formed side channels
- Floor Support: 10" channel longitudinal
runners with 8" channel and formed 1/4 PL channel crossmembers
- Walls: 1/4” PL solid welded, smooth inside,
with formed channel supports outside
- Roof: 2-step design, 1/4” PL solid welded with channel supports outside
- Drain/Fill: 4" drain at floor
each end, 3" fill pipe to roof at front, 4" connection on front,
8" flanged front manifold connection with inside flange, 4" connection on roof
- Manway: 21" manway
on front, side, and (2) on roof
- Pick Up: Standard 5th wheel king pin
- Welds: All welds continuous except substructure crossmembers
- Axle: 25,000 lb. axle with air brakes, 11.00
x 22.5 bias tires on steel disc wheels
- Finish: Per customer specifications
- Hydrotesting: Full capacity static test
- Dimensions: Overall: 42' long, 8'-6" wide, 11' high; 500 barrel
capacity
- Tank pressure/vacuum relief vent
- Level gauging
- Options: Special tank linings, special sizes, open top design, fixed or removable steam coils,
8" exterior
manifold assembly
|
Click images to enlarge
(opens in pop up window) |